ZFS - Zfs Best Practices

ZFS is a combined file system and logical volume manager designed by Sun Microsystems. The features of ZFS include protection against data corruption, support for high storage capacities, efficient data compression, integration of the concepts of filesystem and volume management, snapshots and copy-on-write clones, continuous integrity checking and automatic repair, RAID-Z and native NFSv4 ACLs.

The ZFS name is registered as a trademark of Oracle Corporation; although it was briefly given the retrofitted expanded name "Zettabyte File System", it is no longer considered an initialism. Originally, ZFS was proprietary, closed-source software developed internally by Sun as part of Solaris, with a team led by the CTO of Sun's storage business unit and Sun Fellow, Jeff Bonwick. In 2005, the bulk of Solaris, including ZFS, was licensed as open-source software under the Common Development and Distribution License (CDDL), as the OpenSolaris project. ZFS became a standard feature of Solaris 10 in June 2006.

In 2010, Oracle stopped the releasing of source code for new OpenSolaris and ZFS development, effectively forking their closed-source development from the open-source branch. In response, OpenZFS was created as a new open-source development umbrella project, aiming at bringing together individuals and companies that use the ZFS filesystem in an open-source manner.

Overview and ZFS design goals

source : pt.scribd.com

ZFS compared to most other file systems

Historically, the management of stored data has involved two aspects â€" the physical management of block devices such as hard drives and SD cards, and devices such as RAID controllers that present a logical single device based upon multiple physical devices (often undertaken by a volume manager, array manager, or suitable device driver), and the management of files stored as logical units on these logical block devices (a file system).

Example: A RAID array of 2 hard drives and an SSD caching disk is controlled by Intel's RST system, part of the chipset and firmware built into a desktop computer. The user sees this as a single volume, containing an NTFS-formatted drive of their data, and NTFS is not necessarily aware of the manipulations that may be required (such as rebuilding the RAID array if a disk fails). The management of the individual devices and their presentation as a single device, is distinct from the management of the files held on that apparent device.

ZFS is unusual, because unlike most other storage systems, it unifies both of these roles and acts as both the volume manager and the file system. Therefore, it has complete knowledge of both the physical disks and volumes (including their condition, status, their logical arrangement into volumes, and also of all the files stored on them). ZFS is designed to ensure (subject to suitable hardware) that data stored on disks cannot be lost due to physical error or misprocessing by the hardware or operating system, or bit rot events and data corruption which may happen over time, and its complete control of the storage system is used to ensure that every step, whether related to file management or disk management, is verified, confirmed, corrected if needed, and optimized, in a way that storage controller cards, and separate volume and file managers cannot achieve.

ZFS also includes a mechanism for snapshots and replication, including snapshot cloning; the former is described by the FreeBSD documentation as one of its "most powerful features", having features that "even other file systems with snapshot functionality lack". Very large numbers of snapshots can be taken, without degrading performance, allowing snapshots to be used prior to risky system operations and software changes, or an entire production ("live") file system to be fully snapshotted several times an hour, in order to mitigate data loss due to user error or malicious activity. Snapshots can be rolled back "live" or the file system at previous points in time viewed, even on very large file systems, leading to "tremendous" savings in comparison to formal backup and restore processes, or cloned "on the spot" to form new independent file systems.

Summary of key differentiating features

Examples of features specific to ZFS which facilitate its objective include:

• Designed for long term storage of data, and indefinitely scaled datastore sizes with zero data loss, and high configurability.
• Hierarchical checksumming of all data and metadata, ensuring that the entire storage system can be verified on use, and confirmed to be correctly stored, or remedied if corrupt. Checksums are stored with a block's parent block, rather than with the block itself. This contrasts with many file systems where checksums (if held) are stored with the data so that if the data is lost or corrupt, the checksum is also likely to be lost or incorrect.
• Can store a user-specified number of copies of data or metadata, or selected types of data, to improve the ability to recover from data corruption of important files and structures.
• Automatic rollback of recent changes to the file system and data, in some circumstances, in the event of an error or inconsistency.
• Automated and (usually) silent self-healing of data inconsistencies and write failure when detected, for all errors where the data is capable of reconstruction. Data can be reconstructed using all of the following: error detection and correction checksums stored in each block's parent block; multiple copies of data (including checksums) held on the disk; write intentions logged on the SLOG (ZIL) for writes that should have occurred but did not occur (after a power failure); parity data from RAID/RAIDZ disks and volumes; copies of data from mirrored disks and volumes.
• Native handling of standard RAID levels and additional ZFS RAID layouts ("RAIDZ"). The RAIDZ levels stripe data across only the disks required, for efficiency (many RAID systems stripe indiscriminately across all devices), and checksumming allows rebuilding of inconsistent or corrupted data to be minimised to those blocks with defects;
• Native handling of tiered storage and caching devices, which is usually a volume related task. Because it also understands the file system, it can use file-related knowledge to inform, integrate and optimize its tiered storage handling which a separate device cannot;
• Native handling of snapshots and backup/replication which can be made efficient by integrating the volume and file handling. ZFS can routinely take snapshots several times an hour of the data system, efficiently and quickly. (Relevant tools are provided at a low level and require external scripts and software for utilization).
• Native data compression and deduplication, although the latter is largely handled in RAM and is memory hungry.
• Efficient rebuilding of RAID arrays â€" a RAID controller often has to rebuild an entire disk, but ZFS can combine disk and file knowledge to limit any rebuilding to data which is actually missing or corrupt, greatly speeding up rebuilding;
• Ability to identify data that would have been found in a cache but has been discarded recently instead; this allows ZFS to reassess its caching decisions in light of later use and facilitates very high cache hit levels;
• Alternative caching strategies can be used for data that would otherwise cause delays in data handling. For example, synchronous writes which are capable of slowing down the storage system can be converted to asynchronous writes by being written to a fast separate caching device, known as the SLOG (sometimes called the ZIL - ZFS Intent Log).
• Highly tunable - many internal parameters can be configured for optimal functionality.
• Can be used for high availability clusters and computing, although not fully designed for this use.

Inappropriately specified systems

Unlike many file systems, ZFS is intended to work in a specific way and towards specific ends. It expects or is designed with the assumption of a specific kind of hardware environment. If the system is not suitable for ZFS, then ZFS may underperform significantly. Common system design failures:

• Inadequate RAM â€" ZFS may use a large amount of memory in many scenarios;
• Inadequate disk free space â€" ZFS uses copy on write for data storage; its performance may suffer if the disk pool gets too close to full;
• No efficient dedicated SLOG device, when synchronous writing is prominent â€" this is notably the case for NFS and ESXi; even SSD based systems may need a separate SLOG device for expected performance. The SLOG device is only used for writing apart from when recovering from a system error. It can often be small (for example, in FreeNAS, the SLOG device only needs to store the largest amount of data likely to be written in about 10 seconds (or the size of two 'transaction groups'), although it can be made larger to allow longer lifetime of the device). SLOG is therefore unusual in that its main criteria are pure write functionality, low latency, and loss protection - usually little else matters.
• Lack of suitable caches, or misdesigned caches â€" for example, ZFS can cache read data in RAM ("ARC") or a separate device ("L2ARC"); in some cases adding extra ARC is needed, in other cases adding extra L2ARC is needed, and in some situations adding extra L2ARC can even degrade performance, by forcing RAM to be used for lookup data for the slower L2ARC, at the cost of less room for data in the ARC.
• 'Use of hardware RAID cards, perhaps in the mistaken belief that these will 'help' ZFS. While routine for other filing systems, ZFS handles RAID natively, and is designed to work with a raw and unmodified low level view of storage devices, so it can fully use its functionality. A separate RAID card may leave ZFS less efficient and reliable. For example ZFS checksums all data, but most RAID cards will not do this as effectively, or for cached data. Separate cards can also mislead ZFS about the state of data, for example after a crash, or by mis-signalling exactly when data has safely been written, and in some cases this can lead to issues and data loss. Separate cards can also slow down the system, sometimes greatly, by adding latency to every data read/write operation, or by undertaking full rebuilds of damaged arrays where ZFS would have only needed to do minor repairs of a few seconds.

ZFS terminology and storage structure

source : wikibon.org

Because ZFS acts as both volume manager and file system, the terminology and layout of ZFS storage covers two aspects: how physical devices are organized into vdevs (redundant storage) to create storage for a ZFS pool or zpool (the top level of data container in a ZFS system), and how a pool is used to contain datasets (file systems) and volumes (block devices), the two kinds of data structures which ZFS is capable of presenting to a user.

ZFS commands allow examination of the physical storage in terms of devices, vdevs they are organized into, data pools stored across those vdevs, and in various other ways.

Physical storage configuration: devices and vdevs

The physical devices used by ZFS (such as hard drives (HDDs) and SSDs) are organized into vdevs ("virtual devices") before being used to store data. The vdev is an essential part of ZFS resilience, since it provides redundancy against physical device failure within ZFS. Therefore, it is easiest to describe ZFS physical storage by first looking at vdevs.

Each vdev can be one of:

• a single device, or
• multiple devices in a mirrored configuration, or
• multiple devices in a ZFS RAID ("RaidZ") configuration.

ZFS exposes the individual disks within the system, but manages its in-use data storage capacity at the level of vdevs, with each vdev acting as an independent unit of redundant storage. Devices might not be in a vdev if they are unused spare disks, offline disks, or cache devices.

Each vdev that the user defines, is completely independent from every other vdev, so different types of vdev can be mixed arbitrarily in a single ZFS system. If data redundancy is required (so that data is protected against physical device failure), then this is ensured by the user when they organize devices into vdevs, either by using a mirrored vdev or a RaidZ vdev. Data on a single device vdev may be lost if the device develops a fault. Data on a mirrored or RaidZ vdev will only be lost if enough disks fail at the same time (or before the system has resilvered any replacements due to recent disk failures). A ZFS vdev will continue to function in service if it is capable of providing at least one copy of the data stored on it, although it may become slower due to error fixing and resilvering, as part of its self-repair and data integrity processes. However ZFS is designed to not become unreasonably slow due to self-repair (unless directed to do so by an administrator) since one of its goals is to be capable of uninterrupted continual use even during self checking and self repair.

Since ZFS device redundancy is at vdev level, this also means that if a pool is stored across several vdevs, and one of these vdevs completely fails, then the entire pool content will be lost. This is similar to other RAID and redundancy systems, which require the data to be stored or capable of reconstruction from enough other devices to ensure data is unlikely to be lost due to physical devices failing. Therefore, it is intended that vdevs should be made of either mirrored devices or a RaidZ array of devices, with sufficient redundancy, for important data, so that ZFS can automatically limit and where possible avoid data loss if a device fails. Backups and replication are also an expected part of data protection.

Vdevs can be manipulated while in active use. A single disk can have additional devices added to create a mirrored vdev, and a mirrored vdev can have physical devices added or removed to leave a larger or smaller number of mirrored devices, or a single device. A RaidZ vdev cannot be converted to or from a mirror, although additional vdevs can always be added to expand storage capacity (which can be any kind including RaidZ). A device in any vdev can be marked for removal, and ZFS will de-allocate data from it to allow it to be removed or replaced.

Of note, the devices in a vdev do not have to be the same size, but ZFS may not use the full capacity of all disks in a vdev, if some are larger than other. This only applies to devices within a single vdev. As vdevs are independent, ZFS does not care if different vdevs have different sizes or are built from different devices.

Also as a vdev cannot be shrunk in size, it is common to set aside a small amount of unused space (for example 1-2GB on a multi-TB disk), so that if a disk needs replacing, it is possible to allow for slight manufacturing variances and replace it with another disk of the same nominal capacity but slightly smaller actual capacity.

Cache devices

In addition to devices used for main data storage, ZFS also allows and manages devices used for caching purposes. These can be single devices or multiple mirrored devices, and are fully dedicated to the type of cache designated. Cache usage and its detailed settings can be fully deleted, created and modified without limit during live use. A list of ZFS cache types is given later in this article.

Partitions

ZFS can handle devices formatted into partitions for certain purposes, but this is not common use. Generally caches and data pools are each given a complete device (or multiple complete devices).

Data structures: Pools, datasets and volumes

The top level of data management is a ZFS pool (or zpool). A ZFS system can have multiple pools defined. The vdevs to be used for a pool are specified when the pool is created, and ZFS will use all of the specified vdevs to maximize performance when storing data - a form of striping across the vdevs. Therefore, it is important to ensure that each vdev is sufficiently redundant, as loss of any vdev in a pool would cause loss of the pool, as with any other striping.

A ZFS pool can be expanded at any time by adding new vdevs, including when the system is 'live'. The storage space / vdevs already allocated to a pool cannot be shrunk, as data is stored across all vdevs in the pool (even if it is not yet full). However, as explained above, the individual vdevs can each be modified at any time (within stated limits), and new vdevs added at any time, since the addition or removal of mirrors, or marking of a redundant disk as offline, do not affect the ability of that vdev to store data.

Within pools, ZFS recognizes two types of data store:

• A pool can contain datasets, which are containers storing a native ZFS file system. Datasets can contain other datasets ("nested datasets"), which are transparent for file system purposes. A dataset within another dataset is treated much like a directory for the purposes of file system navigation, but it allows a branch of a file system to have different settings for compression, deduplication and other settings. This is because file system settings are per-dataset (and can be inherited by nested datasets).

• A pool can also contain volumes (also known as zvols), which can be used as block storage devices by other systems. An example of a volume would be an iSCSI or Fibre Channel target for another system, used to create NAS, a SAN, or any other ZFS-backed raw block storage capability. The volume will be seen by other systems as a bare storage device which they can use as they like. Capabilities such as snapshots, redundancy, "scrubbing" (data integrity and repair checks), deduplication, compression, cache usage, and replication are operational but not exposed to the remote system, which "sees" only a bare file storage device. Because ZFS does not create a file storage system on the block device or control how the storage space is used, it cannot create nested ZFS datasets or volumes within a volume.

Since volumes are presented as block devices, they can also be formatted with any other file system, to add ZFS features to that file system, although this is not usual practice. For example, a ZFS volume can be created, and then the block device it presents can be partitioned and formatted with a file system such as ext4 or NTFS. This can be done either locally or over a network (using iSCSI or similar). The resulting file system will be accessible as normal, but will also gain ZFS benefits such as data resilience, data integrity/.scrubbing, snapshots, and additional option for data compression.

Other terminology

• Scrub / scrubbing - ZFS can periodically or on demand check all data and all copies of that data, held in the entire of any pool, dataset or volume (including nested datasets and volumes they contain), to confirm that all copies match the expected integrity checksums, and correct them if not. This is an intensive process and can run in the background, adjusting its activity to match how busy the system is.
• (Re-)silver / (re-)silvering - ZFS automatically remedies any defects found, and regenerates its data onto any new or replacement disks added to a vdev, or to multiple vdevs. (Re-)silvering is the ZFS equivalent of rebuilding a RAID array, but as ZFS has complete knowledge of how storage is being used, and which data is reliable, it can often avoid the full rebuild that other RAID rebuilds require, and copy and verify only the minimum data needed to restore the array to full operation.

Resizing of vdevs, pools, datasets and volumes

Generally ZFS does not expect to reduce the size of a pool, and does not have tools to reduce the set of vdevs that a pool is stored on. Therefore, to remove an entire vdev that is in active use, or to reduce the size of a pool, the data stored on it must be moved to other vdevs (or if easier, it can be deleted and later restored from backups/copies) so that the devices making up the vdev can be freed for other use or the pool deleted and recreated using fewer vdevs or a smaller size.

Additional capacity can be added to a pool at any time, simply by adding more devices if needed, defining the unused devices into vdevs and adding the new vdevs to the pool.

The capacity of an individual vdev is generally fixed when it is defined. There is one exception to this rule: single drive and mirrored vdevs can be expanded to larger (but not smaller) capacities, without affecting the vdev's operation, by adding larger disks and replacing/removing smaller disks, as shown in the example below.

A pool can be expanded into unused space, and the datasets and volumes within a pool can be likewise expanded to use any unused pool space. Datasets do not need a fixed size and can dynamically grow as data is stored, but volumes, being block devices, need to have their size defined by the user, and must be manually resized as required (which can be done 'live').

Resizing example:

• A vdev is made up initially from a single 4TB hard drive, and data stored on it. (Note- not recommended in practice due to risk of data loss).
• Two 6TB drives are added to the vdev while 'live'. The vdev is now configured as a 3-way mirror. Its size is still limited to 4TB (the extra 2TB on each of the new disks is unusable). ZFS will automatically copy data to the new disks (resilvering).
• The original disk is removed, again while 'live'. The vdev that remains contains two 6TB disks and is now a 2-way 6TB mirror, of which 4TB is being used. The pool using that vdev can now use the extra space and expand by 2TB. Any datasets or volumes in the pool can now use the extra space.
• If desired a further disk can be removed, leaving a single device vdev of 6TB (not recommended). Alternatively a set of disks can be added, either configured as a new vdev (to add to the pool or use for a second pool), or added as extra mirrors for the existing vdev.

Read/write efficiency

source : www.scribd.com

ZFS will automatically allocate data storage across all vdevs in a pool (and all devices in each vdev) in a way that generally maximises the performance of the pool. ZFS will also update its write strategy to take account of new disks added to a pool, when they are added.

As a general rule, ZFS allocate writes across vdevs based on the free space in each vdev. This ensures that vdevs which have proportionately less data already, are given more writes when new data is to be stored. This helps to ensure that as the pool becomes more used, the situation does not develop that some vdevs become full, forcing writes to occur on a limited number of devices. It also means that when data is read (and reads are much more frequent than writes in most uses), different parts of the data can be read from as many disks as possible at the same time, giving much higher read performance. Therefore, as a general rule, pools and vdevs should be managed and new storage added, so that the situation does not arise that some vdevs in a pool are almost full and others almost empty, as this will make the pool less efficient.

Features

source : www.nas4free.org

Data integrity

One major feature that distinguishes ZFS from other file systems is that it is designed with a focus on data integrity by protecting the user's data on disk against silent data corruption caused by data degradation, current spikes, bugs in disk firmware, phantom writes (the previous write did not make it to disk), misdirected reads/writes (the disk accesses the wrong block), DMA parity errors between the array and server memory or from the driver (since the checksum validates data inside the array), driver errors (data winds up in the wrong buffer inside the kernel), accidental overwrites (such as swapping to a live file system), etc.

A 2012 research showed that neither any of the then-major and widespread filesystems (such as UFS, Ext, XFS, JFS, or NTFS) nor hardware RAID (which has some issues with data integrity) provided sufficient protection against data corruption problems. Initial research indicates that ZFS protects data better than earlier efforts. It is also faster than UFS and can be seen as its replacement.

ZFS data integrity

For ZFS, data integrity is achieved by using a Fletcher-based checksum or a SHA-256 hash throughout the file system tree. Each block of data is checksummed and the checksum value is then saved in the pointer to that blockâ€"rather than at the actual block itself. Next, the block pointer is checksummed, with the value being saved at its pointer. This checksumming continues all the way up the file system's data hierarchy to the root node, which is also checksummed, thus creating a Merkle tree. In-flight data corruption or phantom reads/writes (the data written/read checksums correctly but is actually wrong) are undetectable by most filesystems as they store the checksum with the data. ZFS stores the checksum of each block in its parent block pointer so the entire pool self-validates.

When a block is accessed, regardless of whether it is data or meta-data, its checksum is calculated and compared with the stored checksum value of what it "should" be. If the checksums match, the data are passed up the programming stack to the process that asked for it; if the values do not match, then ZFS can heal the data if the storage pool provides data redundancy (such as with internal mirroring), assuming that the copy of data is undamaged and with matching checksums. It is optionally possible to provide additional in-pool redundancy by specifying copies=2 (or copies=3 or more), which means that data will be stored twice (or three times) on the disk, effectively halving (or, for copies=3, reducing to one third) the storage capacity of the disk. Additionally some kinds of data used by ZFS to manage the pool are stored multiple times by default for safety, even with the default copies=1 setting.

If other copies of the damaged data exist or can be reconstructed from checksums and parity data, ZFS will use a copy of the data (or recreate it via a RAID recovery mechanism), and recalculate the checksumâ€"ideally resulting in the reproduction of the originally expected value. If the data passes this integrity check, the system can then update all faulty copies with known-good data and redundancy will be restored.

RAID

ZFS and hardware RAID

If the disks are connected to a RAID controller, it is most efficient to configure it as a HBA in JBOD mode (i.e. turn off RAID function). If a hardware RAID card is used, ZFS always detects all data corruption but cannot always repair data corruption because the hardware RAID card will interfere. Therefore, the recommendation is to not use a hardware RAID card, or to flash a hardware RAID card into JBOD/IT mode. For ZFS to be able to guarantee data integrity, it needs to either have access to a RAID set (so all data is copied to at least two disks), or if one single disk is used, ZFS needs to enable redundancy (copies) which duplicates the data on the same logical drive. Using ZFS copies is a good feature to use on notebooks and desktop computers, since the disks are large and it at least provides some limited redundancy with just a single drive.

There are several reasons as to why it is better to rely solely on ZFS by using several independent disks and RAID-Z or mirroring.

When using hardware RAID, the controller usually adds controller-dependent data to the drives which prevents software RAID from accessing the user data. While it is possible to read the data with a compatible hardware RAID controller, this inconveniences consumers as a compatible controller usually isn't readily available. Using the JBOD/RAID-Z combination, any disk controller can be used to resume operation after a controller failure.

Note that hardware RAID configured as JBOD may still detach drives that do not respond in time (as has been seen with many energy-efficient consumer-grade hard drives), and as such, may require TLER/CCTL/ERC-enabled drives to prevent drive dropouts.

Software RAID using ZFS

ZFS offers software RAID through its RAID-Z and mirroring organization schemes.

RAID-Z is a data/parity distribution scheme like RAID-5, but uses dynamic stripe width: every block is its own RAID stripe, regardless of blocksize, resulting in every RAID-Z write being a full-stripe write. This, when combined with the copy-on-write transactional semantics of ZFS, eliminates the write hole error. RAID-Z is also faster than traditional RAID 5 because it does not need to perform the usual read-modify-write sequence.

As all stripes are of different sizes, RAID-Z reconstruction has to traverse the filesystem metadata to determine the actual RAID-Z geometry. This would be impossible if the filesystem and the RAID array were separate products, whereas it becomes feasible when there is an integrated view of the logical and physical structure of the data. Going through the metadata means that ZFS can validate every block against its 256-bit checksum as it goes, whereas traditional RAID products usually cannot do this.

In addition to handling whole-disk failures, RAID-Z can also detect and correct silent data corruption, offering "self-healing data": when reading a RAID-Z block, ZFS compares it against its checksum, and if the data disks did not return the right answer, ZFS reads the parity and then figures out which disk returned bad data. Then, it repairs the damaged data and returns good data to the requestor.

RAID-Z does not require any special hardware: it does not need NVRAM for reliability, and it does not need write buffering for good performance. With RAID-Z, ZFS provides fast, reliable storage using cheap, commodity disks.

There are three different RAID-Z modes: RAID-Z1 (similar to RAID 5, allows one disk to fail), RAID-Z2 (similar to RAID 6, allows two disks to fail), and RAID-Z3 (Also referred to as RAID 7 allows three disks to fail). The need for RAID-Z3 arose recently because RAID configurations with future disks (say, 6â€"10 TB) may take a long time to repair, the worst case being weeks. During those weeks, the rest of the disks in the RAID are stressed more because of the additional intensive repair process and might subsequently fail, too. By using RAID-Z3, the risk involved with disk replacement is reduced.

Mirroring, the other ZFS RAID option, is essentially the same as RAID 1, allowing any number of disks to be mirrored. Like RAID 1 it also allows faster read and resilver/rebuild speeds since all drives can be used simultaneously and parity data is not calculated separately, and mirrored vdevs can be split to create identical copies of the pool.

Resilvering and scrub

ZFS has no tool equivalent to fsck (the standard Unix and Linux data checking and repair tool for file systems). Instead, ZFS has a built-in scrub function which regularly examines all data and repairs silent corruption and other problems. Some differences are:

• fsck must be run on an offline filesystem, which means the filesystem must be unmounted and is not usable while being repaired, while scrub is designed to be used on a mounted, live filesystem, and does not need the ZFS filesystem to be taken offline.
• fsck usually only checks metadata (such as the journal log) but never checks the data itself. This means, after an fsck, the data might still not match the original data as stored.
• fsck cannot always validate and repair data when checksums are stored with data (often the case in many file systems), because the checksums may also be corrupted or unreadable. ZFS always stores checksums separately from the data they verify, improving reliability and the ability of scrub to repair the volume. ZFS also stores multiple copies of data - metadata in particular may have upwards of 4 or 6 copies (multiple copies per disk and multiple disk mirrors per volume), greatly improving the ability of scrub to detect and repair extensive damage to the volume, compared to fsck.
• scrub checks everything, including metadata and the data. The effect can be observed by comparing fsck to scrub times â€" sometimes a fsck on a large RAID completes in a few minutes, which means only the metadata was checked. Traversing all metadata and data on a large RAID takes many hours, which is exactly what scrub does.

The official recommendation from Sun/Oracle is to scrub enterprise-level disks once a month, and cheaper commodity disks once a week.

Capacity

ZFS is a 128-bit file system, so it can address 1.84 × 10¹⁹ times more data than 64-bit systems such as Btrfs. The maximum limits of ZFS are designed to be so large that they should never be encountered in practice. For instance, fully populating a single zpool with 2¹²⁸ bits of data would require 10²⁴ 3 TB hard disk drives.

Some theoretical limits in ZFS are:

• 2⁴⁸: number of entries in any individual directory
• 16 exbibytes (2⁶⁴ bytes): maximum size of a single file
• 16 exbibytes: maximum size of any attribute
• 256 quadrillion zebibytes (2¹²⁸ bytes): maximum size of any zpool
• 2⁵⁶: number of attributes of a file (actually constrained to 2⁴⁸ for the number of files in a directory)
• 2⁶⁴: number of devices in any zpool
• 2⁶⁴: number of zpools in a system
• 2⁶⁴: number of file systems in a zpool

Encryption

With Oracle Solaris, the encryption capability in ZFS is embedded into the I/O pipeline. During writes, a block may be compressed, encrypted, checksummed and then deduplicated, in that order. The policy for encryption is set at the dataset level when datasets (file systems or ZVOLs) are created. The wrapping keys provided by the user/administrator can be changed at any time without taking the file system offline. The default behaviour is for the wrapping key to be inherited by any child data sets. The data encryption keys are randomly generated at dataset creation time. Only descendant datasets (snapshots and clones) share data encryption keys. A command to switch to a new data encryption key for the clone or at any time is providedâ€"this does not re-encrypt already existing data, instead utilising an encrypted master-key mechanism.

Other features

Storage pools

Unlike traditional filesystems which reside on single devices and thus require a volume manager to use more than one device, ZFS filesystems are built on top of virtual storage pools called zpools. A zpool is constructed of virtual devices (vdevs), themselves constructed of block devices: Files, hard drive partitions, or entire drives, with the latter being the recommended usage. Block devices within a vdev may be configured in different ways, depending on needs and space available: non-redundantly (similar to RAID 0), as a mirror (RAID 1) of two or more devices, as a RAID-Z group of three or more devices, or as a RAID-Z2 (similar to RAID-6) group of four or more devices. In July 2009, triple-parity RAID-Z3 was added to OpenSolaris. RAID-Z is a data-protection technology featured by ZFS in order to reduce the block overhead in mirroring.

Thus, a zpool (ZFS storage pool) is vaguely similar to a computer's RAM. The total RAM pool capacity depends on the number of RAM memory sticks and the size of each stick. Likewise, a zpool consists of one or more vdevs. Each vdev can be viewed as a group of hard disks (or partitions, or files, etc.). Each vdev should have redundancy, otherwise if a vdev is lost, then the whole zpool is lost. Thus, each vdev should be configured as RAID-Z1, RAID-Z2, mirror, etc. It is not possible to change the number of drives in an existing vdev (Block Pointer Rewrite will allow this, and also allow defragmentation), but it is always possible to increase storage capacity by adding a new vdev to a zpool. It is possible to swap a drive to a larger drive and resilver (repair) the zpool. If this procedure is repeated for every disk in a vdev, then the zpool will grow in capacity when the last drive is resilvered. A vdev will have the same base capacity as the smallest drive in the group. For instance, a vdev consisting of three 500 GB and one 700 GB drive, will have a capacity of 4×500 GB.

In addition, pools can have hot spares to compensate for failing disks. When mirroring, block devices can be grouped according to physical chassis, so that the filesystem can continue in the case of the failure of an entire chassis.

Storage pool composition is not limited to similar devices, but can consist of ad-hoc, heterogeneous collections of devices, which ZFS seamlessly pools together, subsequently doling out space to diverse filesystems as needed. Arbitrary storage device types can be added to existing pools to expand their size.

The storage capacity of all vdevs is available to all of the file system instances in the zpool. A quota can be set to limit the amount of space a file system instance can occupy, and a reservation can be set to guarantee that space will be available to a file system instance.

Caching mechanisms: ARC (L1), L2ARC, Transaction groups, SLOG (ZIL)

ZFS uses different layers of disk cache to speed up read and write operations. Ideally, all data should be stored in RAM, but that is usually too expensive. Therefore, data is automatically cached in a hierarchy to optimize performance versus cost; these are often called "hybrid storage pools". Frequently accessed data will be stored in RAM, and less frequently accessed data can be stored on slower media, such as solid state drives (SSDs). Data that is not often accessed is not cached and left on the slow hard drives. If old data is suddenly read a lot, ZFS will automatically move it to SSDs or to RAM.

ZFS caching mechanisms include one each for reads and writes, and in each case, two levels of caching can exist, one in computer memory (RAM) and one on fast storage (usually solid state drives (SSDs)), for a total of four caches.

Copy-on-write transactional model

ZFS uses a copy-on-write transactional object model. All block pointers within the filesystem contain a 256-bit checksum or 256-bit hash (currently a choice between Fletcher-2, Fletcher-4, or SHA-256) of the target block, which is verified when the block is read. Blocks containing active data are never overwritten in place; instead, a new block is allocated, modified data is written to it, then any metadata blocks referencing it are similarly read, reallocated, and written. To reduce the overhead of this process, multiple updates are grouped into transaction groups, and ZIL (intent log) write cache is used when synchronous write semantics are required. The blocks are arranged in a tree, as are their checksums (see Merkle signature scheme).

Snapshots and clones

An advantage of copy-on-write is that, when ZFS writes new data, the blocks containing the old data can be retained, allowing a snapshot version of the file system to be maintained. ZFS snapshots are consistent (they reflect the entire data as it existed at a single point in time), and can be created extremely quickly, since all the data composing the snapshot is already stored, with the entire storage pool often snapshotted several times per hour. They are also space efficient, since any unchanged data is shared among the file system and its snapshots. snapshots are inherently read-only, ensuring they will not be modified after creation, although they should not be relied on as a sole means of backup. Entire snapshots can be restored and also files and directories within snapshots.

Writeable snapshots ("clones") can also be created, resulting in two independent file systems that share a set of blocks. As changes are made to any of the clone file systems, new data blocks are created to reflect those changes, but any unchanged blocks continue to be shared, no matter how many clones exist. This is an implementation of the Copy-on-write principle.

Sending and receiving snapshots

ZFS file systems can be moved to other pools, also on remote hosts over the network, as the send command creates a stream representation of the file system's state. This stream can either describe complete contents of the file system at a given snapshot, or it can be a delta between snapshots. Computing the delta stream is very efficient, and its size depends on the number of blocks changed between the snapshots. This provides an efficient strategy, e.g., for synchronizing offsite backups or high availability mirrors of a pool.

Dynamic striping

Dynamic striping across all devices to maximize throughput means that as additional devices are added to the zpool, the stripe width automatically expands to include them; thus, all disks in a pool are used, which balances the write load across them.

Variable block sizes

ZFS uses variable-sized blocks, with 128 KB as the default size. Available features allow the administrator to tune the maximum block size which is used, as certain workloads do not perform well with large blocks. If data compression is enabled, variable block sizes are used. If a block can be compressed to fit into a smaller block size, the smaller size is used on the disk to use less storage and improve IO throughput (though at the cost of increased CPU use for the compression and decompression operations).

Lightweight filesystem creation

In ZFS, filesystem manipulation within a storage pool is easier than volume manipulation within a traditional filesystem; the time and effort required to create or expand a ZFS filesystem is closer to that of making a new directory than it is to volume manipulation in some other systems.

Adaptive endianness

Pools and their associated ZFS file systems can be moved between different platform architectures, including systems implementing different byte orders. The ZFS block pointer format stores filesystem metadata in an endian-adaptive way; individual metadata blocks are written with the native byte order of the system writing the block. When reading, if the stored endianness does not match the endianness of the system, the metadata is byte-swapped in memory.

This does not affect the stored data; as is usual in POSIX systems, files appear to applications as simple arrays of bytes, so applications creating and reading data remain responsible for doing so in a way independent of the underlying system's endianness.

Deduplication

Data deduplication capabilities were added to the ZFS source repository at the end of October 2009, and relevant OpenSolaris ZFS development packages have been available since December 3, 2009 (build 128).

Effective use of deduplication may require large RAM capacity; recommendations range between 1 and 5 GB of RAM for every TB of storage. Insufficient physical memory or lack of ZFS cache can result in virtual memory thrashing when using deduplication, which can either lower performance or result in complete memory starvation. Solid-state drives (SSDs) can be used to cache deduplication tables, thereby speeding up deduplication performance.

Other storage vendors use modified versions of ZFS to achieve very high data compression ratios. Two examples in 2012 were GreenBytes and Tegile. In May 2014, Oracle bought GreenBytes for its ZFS deduplication and replication technology.

Additional capabilities

• Explicit I/O priority with deadline scheduling.
• Claimed globally optimal I/O sorting and aggregation.
• Multiple independent prefetch streams with automatic length and stride detection.
• Parallel, constant-time directory operations.
• End-to-end checksumming, using a kind of "Data Integrity Field", allowing data corruption detection (and recovery if you have redundancy in the pool). A choice of 3 hashes can be used, optimized for speed (fletcher), standardization and security (SHA256) and salted hashes (BLAKE).
• Transparent filesystem compression. Supports LZJB, gzip and LZ4.
• Intelligent scrubbing and resilvering (resyncing).
• Load and space usage sharing among disks in the pool.
• Ditto blocks: Configurable data replication per filesystem, with zero, one or two extra copies requested per write for user data, and with that same base number of copies plus one or two for metadata (according to metadata importance). If the pool has several devices, ZFS tries to replicate over different devices. Ditto blocks are primarily an additional protection against corrupted sectors, not against total disk failure.
• ZFS design (copy-on-write + superblocks) is safe when using disks with write cache enabled, if they honor the write barriers. This feature provides safety and a performance boost compared with some other filesystems.
• On Solaris, when entire disks are added to a ZFS pool, ZFS automatically enables their write cache. This is not done when ZFS only manages discrete slices of the disk, since it does not know if other slices are managed by non-write-cache safe filesystems, like UFS. The FreeBSD implementation can handle disk flushes for partitions thanks to its GEOM framework, and therefore does not suffer from this limitation.
• Per-user and per-group quotas support.
• Filesystem encryption since Solaris 11 Express.
• Pools can be imported in read-only mode.
• It is possible to recover data by rolling back entire transactions at the time of importing the zpool.
• ZFS is not a clustered filesystem; however, clustered ZFS is available from third parties.
• Snapshots can be taken manually or automatically. The older versions of stored data that they contain can be exposed to client systems via CIFS (also known as SMB/Samba and used by Microsoft Windows file shares) as "Previous versions", "VSS shadow copies", or "File history", and AFP (for Apple devices) as " Apple Time Machine".
• Disks can be marked as 'spare'. A data pool can be set to automatically and transparently handle disk faults by activating a spare disk and beginning to resilver the data that was on the suspect disk onto it, when needed.

Limitations

source : twitter.com

Limitations in preventing data corruption

A 2010 paper examining the ability of file systems to detect and prevent data corruption observed that ZFS itself is effective in detecting and correcting data errors on storage devices, but that it assumes data in RAM are "safe", and not prone to error. Thus when ZFS caches pages, or stores copies of metadata, in RAM, or holds data in its "dirty" cache for writing to disk, no test is made whether the checksums still match the data at the point of use. Much of this risk can be mitigated by use of ECC RAM but the authors considered that error detection related to the page cache and heap would allow ZFS to handle certain classes of error more robustly.

The authors of a study entirely dedicated to ZFS data integrity point out that "[...] a single bit flip in memory causes a small but non-negligible percentage of runs to experience a failure", with the probability of committing bad data to disk varying from 0% to 3.6% (according to the workload).

However, one of the main architects of ZFS, Matt Ahrens, explains there is an option to turn on checksumming of the data in memory by using the ZFS_DEBUG_MODIFY flag (zfs_flags=0x10) which addresses these concerns.

Limitations specific to ZFS

• Capacity expansion is normally achieved by adding groups of disks as a top-level vdev: simple device, RAID-Z, RAID Z2, RAID 3, or mirrored. Newly written data will dynamically start to use all available vdevs. It is also possible to expand the array by iteratively swapping each drive in the array with a bigger drive and waiting for ZFS to self-heal; the heal time will depend on the amount of stored information, not the disk size.
• As of Solaris 10 Update 11 and Solaris 11.2, it is neither possible to reduce the number of top-level vdevs in a pool, nor to otherwise reduce pool capacity. This functionality was said to be in development already in 2007.
• It is not possible to add a disk as a column to a RAID Z, RAID Z2 or RAID Z3 vdev. However, a new RAID Z vdev can be created instead and added to the zpool.
• Some traditional nested RAID configurations, such as RAID 51 (a mirror of RAID 5 groups), are not configurable in ZFS. Vdevs can only be composed of raw disks or files, not other vdevs. However, a ZFS pool effectively creates a stripe (RAID 0) across its vdevs, so the equivalent of a RAID 50 or RAID 60 is common.
• Reconfiguring the number of devices in a top-level vdev requires copying data offline, destroying the pool, and recreating the pool with the new top-level vdev configuration, except for adding extra redundancy to an existing mirror, which can be done at any time or if all top level vdevs are mirrors with sufficient redundancy the zpool split command can be used to remove a vdev from each top level vdev in the pool, creating a 2nd pool with identical data.
• Resilver (repair) of a crashed disk in a ZFS RAID can take a long time (this is not unique to ZFS, it applies to all types of RAID, in one way or another). This means that very large volumes can take several days to repair or to being back to full redundancy after severe data corruption or failure, and during this time a second disk failure may occur, especially as the repair puts additional stress on the system as a whole. In turn this means that configurations that only allow for recovery of a single disk failure, such as RAID Z1 (similar to RAID 5) should be avoided. Therefore, with large disks, one should use RAID Z2 (allow two disks to crash) or RAID Z3 (allow three disks to crash). It should be noted however, that ZFS RAID differs from conventional RAID by only reconstructing live data and metadata when replacing a disk, not the entirety of the disk including blank and garbage blocks, which means that replacing a member disk on a ZFS pool that is only partially full will take considerably less time compared to conventional RAID.
• IOPS performance of a ZFS storage pool can suffer if the ZFS raid is not appropriately configured. This applies to all types of RAID, in one way or another. If the zpool consists of only one group of disks configured as, say, eight disks in RAID Z2, then the IOPS performance will be that of a single disk (read speed will be equivalent to 8 disks, but write speed will be similar to a single disk). However, there are ways to mitigate this IOPS performance problem, for instance add SSDs as L2ARC cache â€" which can boost IOPS into 100.000s. In short, a zpool should consist of several groups of vdevs, each vdev consisting of 8â€"12 disks, if using RAID Z. It is not recommended to create a zpool with a single large vdev, say 20 disks, because IOPS performance will be that of a single disk, which also means that resilver time will be very long (possibly weeks with future large drives).
• Online shrink is not supported.

Platforms

source : tr.scribd.com

Solaris

Solaris 10 update 2 and later

ZFS is part of Sun's own Solaris operating system and is thus available on both SPARC and x86-based systems.

Solaris 11

After Oracle's Solaris 11 Express release, the OS/Net consolidation (the main OS code) was made proprietary and closed-source, and further ZFS upgrades and implementations inside Solaris (such as encryption) are not compatible with other non-proprietary implementations which use previous versions of ZFS.

When creating a new ZFS pool, to retain the ability to use access the pool from other non-proprietary Solaris-based distributions, it is recommended to upgrade to Solaris 11 Express from OpenSolaris (snv_134b), and thereby stay at ZFS version 28.

OpenSolaris

OpenSolaris 2008.05, 2008.11 and 2009.06 use ZFS as their default filesystem. There are over a dozen 3rd-party distributions, of which nearly a dozen are mentioned here. (OpenIndiana and illumos are two new distributions not included on the OpenSolaris distribution reference page.)

OpenIndiana

OpenIndiana uses OpenZFS with feature flags as implemented in Illumos. ZFS version 28 used up to version 151a3.

By upgrading from OpenSolaris snv_134 to both OpenIndiana and Solaris 11 Express, one also has the ability to upgrade and separately boot Solaris 11 Express on the same ZFS pool, but one should not install Solaris 11 Express first because of ZFS incompatibilities introduced by Oracle past ZFS version 28.

BSD

macOS

OpenZFS on OSX (abbreviated to O3X) is an implementation of ZFS for macOS. O3X is under active development, with close relation to ZFS on Linux and illumos' ZFS implementation, while maintaining feature flag compatibility with ZFS on Linux. O3X implements zpool version 5000, and includes the Solaris Porting Layer (SPL) originally authored for MacZFS, which has been further enhanced to include a memory management layer based on the illumos kmem and vmem allocators. O3X is fully featured, supporting LZ4 compression, deduplication, ARC, L2ARC, and SLOG.

MacZFS is free software providing support for ZFS on macOS. The stable legacy branch provides up to ZFS pool version 8 and ZFS filesystem version 2. The development branch, based on ZFS on Linux and OpenZFS, provides updated ZFS functionality, such as up to ZFS zpool version 5000 and feature flags.

A proprietary implementation of ZFS (Zevo) was available at no cost from GreenBytes, Inc., implementing up to ZFS file system version 5 and ZFS pool version 28. Zevo offered a limited ZFS feature set, pending further commercial development; it was sold to Oracle in 2014, with unknown future plans.

DragonFlyBSD

Edward O'Callaghan started the initial port of ZFS to DragonFlyBSD.

NetBSD

The NetBSD ZFS port was started as a part of the 2007 Google Summer of Code and in August 2009, the code was merged into NetBSD's source tree.

FreeBSD

Paweł Jakub Dawidek ported ZFS to FreeBSD, and it has been part of FreeBSD since version 7.0. This includes zfsboot, which allows booting FreeBSD directly from a ZFS volume.

FreeBSD's ZFS implementation is fully functional; the only missing features are kernel CIFS server and iSCSI, but the latter can be added using externally available packages. Samba can be used to provide a userspace CIFS server.

FreeBSD 7-STABLE (where updates to the series of versions 7.x are committed to) uses zpool version 6.

FreeBSD 8 includes a much-updated implementation of ZFS, and zpool version 13 is supported. zpool version 14 support was added to the 8-STABLE branch on January 11, 2010, and is included in FreeBSD release 8.1. zpool version 15 is supported in release 8.2. The 8-STABLE branch gained support for zpool version v28 and zfs version 5 in early June 2011. These changes were released mid-April 2012 with FreeBSD 8.3.

FreeBSD 9.0-RELEASE uses ZFS Pool version 28.

FreeBSD 9.2-RELEASE is the first FreeBSD version to use the new "feature flags" based implementation thus Pool version 5000.

MidnightBSD

MidnightBSD, a desktop operating system derived from FreeBSD, supports ZFS storage pool version 6 as of 0.3-RELEASE. This was derived from code included in FreeBSD 7.0-RELEASE. An update to storage pool 28 is in progress in 0.4-CURRENT and based on 9-STABLE sources around FreeBSD 9.1-RELEASE code.

TrueOS

TrueOS (formerly known as PC-BSD) is a desktop-oriented distribution of FreeBSD, which inherits its ZFS support.

FreeNAS

FreeNAS, an embedded open source network-attached storage (NAS) distribution based on FreeBSD, has the same ZFS support as FreeBSD and PC-BSD.

ZFS Guru

ZFS Guru, an embedded open source network-attached storage (NAS) distribution based on FreeBSD, under active development.

pfSense and PCBSD

pfSense, an open source BSD based router, and PCBSD, a BSD based desktop, both support ZFS (pfSense in its upcoming 2.4 release).

NAS4Free

NAS4Free, an embedded open source network-attached storage (NAS) distribution based on FreeBSD, has the same ZFS support as FreeBSD, ZFS storage pool version 5000. This project is a continuation of FreeNAS 7 series project.

Debian GNU/kFreeBSD

Being based on the FreeBSD kernel, Debian GNU/kFreeBSD has ZFS support from the kernel. However, additional userland tools are required, while it is possible to have ZFS as root or /boot file system in which case required GRUB configuration is performed by the Debian installer since the Wheezy release.

As of 31 January 2013, the ZPool version available is 14 for the Squeeze release, and 28 for the Wheezy-9 release.

Linux

Although the ZFS filesystem supports Linux-based operating systems, difficulties arise for Linux distribution maintainers wishing to provide native support for ZFS in their products due to potential legal incompatibilities between the CDDL license used by the ZFS code, and the GPL license used by the Linux kernel. To enable ZFS support within Linux, a loadable kernel module containing the CDDL-licensed ZFS code must be compiled and loaded into the kernel. According to the Free Software Foundation, the wording of the GPL license legally prohibits redistribution of the resulting product as a derivative work, though this viewpoint has caused some controversy.

ZFS on FUSE

One potential workaround to licensing incompatibility was trialed in 2006, with an experimental port of the ZFS code to Linux's FUSE system. The filesystem ran entirely in userspace instead of being integrated into the Linux kernel, and was therefore not considered a derivative work of the kernel. This approach was functional, but suffered from significant performance penalties when compared with integrating the filesystem as a native kernel module running in kernel space. As of 2016, the ZFS on FUSE project appears to be defunct.

Native ZFS on Linux

A native port of ZFS for Linux produced by the Lawrence Livermore National Laboratory (LLNL) was released in March 2013, following these key events:

• 2008: prototype to determine viability
• 2009: initial ZVOL and Lustre support
• 2010: development moved to GitHub
• 2011: POSIX layer added
• 2011: community of early adopters
• 2012: production usage of ZFS
• 2013: stable GA release

As of August 2014, ZFS on Linux uses the OpenZFS pool version number 5000, which indicates that the features it supports are defined via feature flags. This pool version is an unchanging number that is expected to never conflict with version numbers given by Oracle.

KQ InfoTech

Another native port for Linux was developed by KQ InfoTech in 2010. This port used the zvol implementation from the Lawrence Livermore National Laboratory as a starting point. A release supporting zpool v28 was announced in January 2011. In April 2011, KQ Infotech was acquired by sTec, Inc., and their work on ZFS ceased. Source code of this port can be found on GitHub.

The work of KQ InfoTech was ultimately integrated into the LLNL's native port of ZFS for Linux.

Source code distribution

While the license incompatibility may arise with the distribution of compiled binaries containing ZFS code, it is generally agreed that distribution of the source code itself is not affected by this. In Gentoo, configuring a ZFS root filesystem is well documented and the required packages can be installed from its package repository. Slackware also provides documentation on supporting ZFS, both as a kernel module and when built into the kernel.

Ubuntu integration

The question of the CDDL license's compatibility with the GPL license resurfaced in 2015, when the Linux distribution Ubuntu announced that it intended to make precompiled OpenZFS binary kernel modules available to end-users directly from the distribution's official package repositories. In 2016, Ubuntu announced that a legal review resulted in the conclusion that providing support for ZFS via a binary kernel module was not in violation of the provisions of the GPL license. Others followed Ubuntu's conclusion, while the FSF and SFC reiterated their opposing view.

Ubuntu 16.04 LTS ("Xenial Xerus"), released on April 21, 2016, allows the user to install the OpenZFS binary packages directly from the Ubuntu software repositories. As of April 2017, no legal challenge has been brought against Canonical regarding the distribution of these packages.

List of operating systems supporting ZFS

List of Operating Systems, distributions and add-ons that support ZFS, the zpool version it supports, and the Solaris build they are based on (if any):

History

source : blogs.oracle.com

ZFS was designed and implemented by a team at Sun led by Jeff Bonwick, Bill Moore and Matthew Ahrens. It was announced on September 14, 2004, but development started in 2001. Source code for ZFS was integrated into the main trunk of Solaris development on October 31, 2005 and released as part of build 27 of OpenSolaris on November 16, 2005. Sun announced that ZFS was included in the 6/06 update to Solaris 10 in June 2006, one year after the opening of the OpenSolaris community.

The name at one point was said to stand for "Zettabyte File System", but by 2006 was no longer considered to be an abbreviation. A ZFS file system can store up to 256 quadrillion zettabytes (ZB).

In September 2007, NetApp sued Sun claiming that ZFS infringed some of NetApp's patents on Write Anywhere File Layout. Sun counter-sued in October the same year claiming the opposite. The lawsuits were ended in 2010 with an undisclosed settlement.

Open source implementations

The following is a list of events in the development of open-source ZFS implementations:

• 2005: Source code was released as part of OpenSolaris.
• 2006: Development of a FUSE port for Linux started.
• 2007: Apple started porting ZFS to Mac OS X.
• 2008: A port to FreeBSD was released as part of FreeBSD 7.0.
• 2008: Development of a native Linux port started.
• 2009: Apple's ZFS project closed. The MacZFS project continued to develop the code.
• 2010: OpenSolaris was discontinued. Further development of ZFS on Solaris was no longer open source.
• 2010: illumos was founded as an open source successor, and continued to develop ZFS in the open. Ports of ZFS to other platforms continued porting upstream changes from illumos.
• 2013: The OpenZFS project begins, aiming at coordinated open-source development of ZFS.

Use in commercial products

• 2008: Sun shipped a line of ZFS-based 7000-series storage appliances.
• 2013: Oracle shipped ZS3 series of ZFS-based filers and seized first place in the SPC-2 benchmark with one of them.
• 2013: iXsystems ships ZFS-based NAS devices called FreeNAS for SOHO and TrueNAS for the enterprise.
• 2014: Netgear ships a line of ZFS-based NAS devices called ReadyDATA, designed to be used in the enterprise.
• 2015: rsync.net announces a cloud storage platform that allows customers to provision their own zpool and import and export data using zfs send and zfs receive.

Detailed release history

With ZFS in Oracle Solaris: as new features are introduced, the version numbers of the pool and file system are incremented to designate the format and features available. Features that are available in specific file system versions require a specific pool version.

Distributed development of OpenZFS involves feature flags and pool version 5000, an unchanging number that is expected to never conflict with version numbers given by Oracle. Legacy version numbers still exist for pool versions 1â€"28, implied by the version 5000. Illumos uses pool version 5000 for this purpose. Future on-disk format changes are enabled / disabled independently via feature flags.

Note: The Solaris version under development by Sun since the release of Solaris 10 in 2005 was codenamed 'Nevada', and was derived from what was the OpenSolaris codebase. 'Solaris Nevada' is the codename for the next-generation Solaris OS to eventually succeed Solaris 10 and this new code was then pulled successively into new OpenSolaris 'Nevada' snapshot builds. OpenSolaris is now discontinued and OpenIndiana forked from it. A final build (b134) of OpenSolaris was published by Oracle (2010-Nov-12) as an upgrade path to Solaris 11 Express.

macOS

The first indication of Apple Inc.'s interest in ZFS was an April 2006 post on the opensolaris.org zfs-discuss mailing list where an Apple employee mentioned being interested in porting ZFS to their Mac OS X operating system. In the release version of Mac OS X 10.5, ZFS was available in read-only mode from the command line, which lacks the possibility to create zpools or write to them. Before the 10.5 release, Apple released the "ZFS Beta Seed v1.1", which allowed read-write access and the creation of zpools,; however, the installer for the "ZFS Beta Seed v1.1" has been reported to only work on version 10.5.0, and has not been updated for version 10.5.1 and above. In August 2007, Apple opened a ZFS project on their Mac OS Forge web site. On that site, Apple provided the source code and binaries of their port of ZFS which includes read-write access, but there was no installer available until a third-party developer created one. In October 2009, Apple announced a shutdown of the ZFS project on Mac OS Forge. That is to say that their own hosting and involvement in ZFS was summarily discontinued. No explanation was given, just the following statement: "The ZFS project has been discontinued. The mailing list and repository will also be removed shortly." Apple would eventually release the legally required, CDDL-derived, portion of the source code of their final public beta of ZFS, code named "10a286". Complete ZFS support was once advertised as a feature of Snow Leopard Server (Mac OS X Server 10.6). However, by the time the operating system was released, all references to this feature had been silently removed from its features page. Apple has not commented regarding the omission.

Apple's "10a286" source code release, and versions of the previously released source and binaries, have been preserved and new development has been adopted by a group of enthusiasts. The MacZFS project acted quickly to mirror the public archives of Apple's project before the materials would have disappeared from the internet, and then to resume its development elsewhere. The MacZFS community has curated and matured the project, supporting ZFS for all Mac OS releases since 10.5. The project has an active mailing list. As of July 2012, MacZFS implements zpool version 8 and ZFS version 2, from the October 2008 release of Solaris. Additional historical information and commentary can be found on the MacZFS web site and FAQ.

The 17th September 2013 launch of OpenZFS included ZFS-OSX, which will become a new version of MacZFS, as the distribution for Darwin.

See also

source : www.scribd.com

References

source : justanothergeeks.blogspot.com

Bibliography

External links